Parts index


We stock over 307 Carburation

Carburation can be a bit of a black art, especially on tuned scooters. MRB share their expertise by only stocking carburettors we have used ourselves so we know what works and what doesn't. We keep a full range of spares for all the carburettors we sell. We provide a back up service on carburation that is 2nd to none. Most dealers have asked us about jetting at some point! We don't supply spares for standard types carburettors (apart from main jets). There are several reasons for this but the main one is that we do not think that standard type carburettors are "up to the job" in the 21st century. They are either worn out, unsuitable for use on tuned scooters or else you are looking at poorly made copies of standard carburettors.


Showing parts 1 - 7 of 7

Sort by:


Dellorto Carburettor, 28mm PHBH, Pre-jetted
MBD10001

A complete carb kit to suit a Lambretta or Vespa. Comes pre jetted, slightly rich. Comes with; Spare needles & Jets Cable choke assembly Large float valve Jets fitted; 55 Idle... [more]


£ 144.00£ 120.00 (Ex Vat)
Dellorto Carburettor, 30mm PHBH, REED type Pre-jetted
MBD10004

A complete carb kit to suit a Lambretta or Vespa with Reed valve conversion. Comes pre jetted, slightly rich. Comes with; Spare needles & Jets Cable choke assembly Large... [more]


£ 144.00£ 120.00 (Ex Vat)
Lambretta Air filter (foam) cone type for large carbs, fits against side panel
MBU0447

This cone air filter can be modified by cutting a small hole just big enough to squeeze tightly over the carbs bell mouth, which... [more]


£ 15.60£ 13.00 (Ex Vat)
Lambretta Inlet manifold, large block, MB Shorty reed valve (block) manifold only, MB
MRB0770K

New from MB carrying on from our original 1980's reed block.    This new new cast alloy 4/6 petal inlet manifold was designed to... [more]


£ 42.29£ 35.24 (Ex Vat)
Dellorto Needle set (kit) PHBL, bgm
MBGM0254

This handy box contains 10 very commonly used D type needles, as used in PHBL carburettors. ... [more]


£ 15.91£ 13.26 (Ex Vat)
Carburettor, 28mm PHBH Dellorto, REED type Pre-jetted
MBD10003

A complete carb kit to suit a Lambretta or Vespa with Reed valve conversion. Comes pre jetted, slightly rich. Comes with; Spare needles & Jets Cable choke assembly Large... [more]


£ 144.00£ 120.00 (Ex Vat)
Dellorto Carburettor, 30mm PHBH, Pre-jetted
MBD10002

A complete carb kit to suit a Lambretta or Vespa. Comes pre jetted, slightly rich. Comes with; Spare needles & Jets Cable choke assembly Large float valve Jets fitted; 55 Idle... [more]


£ 144.00£ 120.00 (Ex Vat)